Stats¶

This documentation is for the Envoy v3 API.

As of Envoy v1.18 the v2 API has been removed and is no longer supported.

If you are upgrading from v2 API config you may wish to view the v2 API documentation:

config/metrics/v2/stats.proto

config.metrics.v3.StatsSink¶

Configuration for pluggable stats sinks.

{
  "name": "...",
  "typed_config": "{...}"
}

name: (string) The name of the stats sink to instantiate. The name must match a supported stats sink. See the extensions listed in typed_config below for the default list of available stats sink. Sinks optionally support tagged/multiple dimensional metrics.

typed_config

(Any) Stats sink specific configuration which depends on the sink being instantiated. See StatsdSink for an example.

Tip

This extension category has the following known extensions:

config.metrics.v3.StatsConfig¶

[config.metrics.v3.StatsConfig proto]

Statistics configuration such as tagging.

{
  "stats_tags": [],
  "use_all_default_tags": "{...}",
  "stats_matcher": "{...}",
  "histogram_bucket_settings": []
}

stats_tags: (repeated config.metrics.v3.TagSpecifier) Each stat name is iteratively processed through these tag specifiers. When a tag is matched, the first capture group is removed from the name so later TagSpecifiers cannot match that same portion of the match.

use_all_default_tags

(BoolValue) Use all default tag regexes specified in Envoy. These can be combined with custom tags specified in stats_tags. They will be processed before the custom tags.

Note

If any default tags are specified twice, the config will be considered invalid.

See well_known_names.h for a list of the default tags in Envoy.

If not provided, the value is assumed to be true.

stats_matcher: (config.metrics.v3.StatsMatcher) Inclusion/exclusion matcher for stat name creation. If not provided, all stats are instantiated as normal. Preventing the instantiation of certain families of stats can improve memory performance for Envoys running especially large configs.

Warning

Excluding stats may affect Envoy’s behavior in undocumented ways. See issue #8771 for more information. If any unexpected behavior changes are observed, please open a new issue immediately.

histogram_bucket_settings

(repeated config.metrics.v3.HistogramBucketSettings) Defines rules for setting the histogram buckets. Rules are evaluated in order, and the first match is applied. If no match is found (or if no rules are set), the following default buckets are used:

config.metrics.v3.StatsMatcher¶

[config.metrics.v3.StatsMatcher proto]

Configuration for disabling stat instantiation.

{
  "reject_all": "...",
  "exclusion_list": "{...}",
  "inclusion_list": "{...}"
}

reject_all

(bool) If reject_all is true, then all stats are disabled. If reject_all is false, then all stats are enabled.

Precisely one of reject_all, exclusion_list, inclusion_list must be set.

exclusion_list

(type.matcher.v3.ListStringMatcher) Exclusive match. All stats are enabled except for those matching one of the supplied StringMatcher protos.

Precisely one of reject_all, exclusion_list, inclusion_list must be set.

inclusion_list

(type.matcher.v3.ListStringMatcher) Inclusive match. No stats are enabled except for those matching one of the supplied StringMatcher protos.

Precisely one of reject_all, exclusion_list, inclusion_list must be set.

config.metrics.v3.TagSpecifier¶

[config.metrics.v3.TagSpecifier proto]

Designates a tag name and value pair. The value may be either a fixed value or a regex providing the value via capture groups. The specified tag will be unconditionally set if a fixed value, otherwise it will only be set if one or more capture groups in the regex match.

{
  "tag_name": "...",
  "regex": "...",
  "fixed_value": "..."
}

tag_name: (string) Attaches an identifier to the tag values to identify the tag being in the sink. Envoy has a set of default names and regexes to extract dynamic portions of existing stats, which can be found in well_known_names.h in the Envoy repository. If a tag_name is provided in the config and neither regex or fixed_value were specified, Envoy will attempt to find that name in its set of defaults and use the accompanying regex.

Note

It is invalid to specify the same tag name twice in a config.

regex

(string) Designates a tag to strip from the tag extracted name and provide as a named tag value for all statistics. This will only occur if any part of the name matches the regex provided with one or more capture groups.

The first capture group identifies the portion of the name to remove. The second capture group (which will normally be nested inside the first) will designate the value of the tag for the statistic. If no second capture group is provided, the first will also be used to set the value of the tag. All other capture groups will be ignored.

Example 1. a stat name cluster.foo_cluster.upstream_rq_timeout and one tag specifier:

{
  "tag_name": "envoy.cluster_name",
  "regex": "^cluster\\.((.+?)\\.)"
}

Note that the regex will remove foo_cluster. making the tag extracted name cluster.upstream_rq_timeout and the tag value for envoy.cluster_name will be foo_cluster (note: there will be no . character because of the second capture group).

Example 2. a stat name http.connection_manager_1.user_agent.ios.downstream_cx_total and two tag specifiers:

[
  {
    "tag_name": "envoy.http_user_agent",
    "regex": "^http(?=\\.).*?\\.user_agent\\.((.+?)\\.)\\w+?$"
  },
  {
    "tag_name": "envoy.http_conn_manager_prefix",
    "regex": "^http\\.((.*?)\\.)"
  }
]

The two regexes of the specifiers will be processed in the definition order.

The first regex will remove ios., leaving the tag extracted name http.connection_manager_1.user_agent.downstream_cx_total. The tag envoy.http_user_agent will be added with tag value ios.

The second regex will remove connection_manager_1. from the tag extracted name produced by the first regex http.connection_manager_1.user_agent.downstream_cx_total, leaving http.user_agent.downstream_cx_total as the tag extracted name. The tag envoy.http_conn_manager_prefix will be added with the tag value connection_manager_1.

Only one of regex, fixed_value may be set.

fixed_value

(string) Specifies a fixed tag value for the tag_name.

Only one of regex, fixed_value may be set.

config.metrics.v3.HistogramBucketSettings¶

[config.metrics.v3.HistogramBucketSettings proto]

Specifies a matcher for stats and the buckets that matching stats should use.

{
  "match": "{...}",
  "buckets": []
}

match: (type.matcher.v3.StringMatcher, REQUIRED) The stats that this rule applies to. The match is applied to the original stat name before tag-extraction, for example cluster.exampleclustername.upstream_cx_length_ms.

buckets: (repeated double, REQUIRED) Each value is the upper bound of a bucket. Each bucket must be greater than 0 and unique. The order of the buckets does not matter.

config.metrics.v3.StatsdSink¶

[config.metrics.v3.StatsdSink proto]

Stats configuration proto schema for built-in envoy.stat_sinks.statsd sink. This sink does not support tagged metrics.

This extension may be referenced by the qualified name envoy.stat_sinks.statsd

Note

This extension does not operate on the data plane and hence is intended to be robust against untrusted traffic.

Tip

This extension extends and can be used with the following extension category:

envoy.stats_sinks

{
  "address": "{...}",
  "tcp_cluster_name": "...",
  "prefix": "..."
}

address

(config.core.v3.Address) The UDP address of a running statsd compliant listener. If specified, statistics will be flushed to this address.

Precisely one of address, tcp_cluster_name must be set.

tcp_cluster_name

(string) The name of a cluster that is running a TCP statsd compliant listener. If specified, Envoy will connect to this cluster to flush statistics.

Precisely one of address, tcp_cluster_name must be set.

prefix

(string) Optional custom prefix for StatsdSink. If specified, this will override the default prefix. For example:

{
  "prefix" : "envoy-prod"
}

will change emitted stats to

envoy-prod.test_counter:1|c
envoy-prod.test_timer:5|ms

Note that the default prefix, “envoy”, will be used if a prefix is not specified.

Stats with default prefix:

envoy.test_counter:1|c
envoy.test_timer:5|ms

config.metrics.v3.DogStatsdSink¶

[config.metrics.v3.DogStatsdSink proto]

Stats configuration proto schema for built-in envoy.stat_sinks.dog_statsd sink. The sink emits stats with DogStatsD compatible tags. Tags are configurable via StatsConfig.

This extension may be referenced by the qualified name envoy.stat_sinks.dog_statsd

Note

This extension does not operate on the data plane and hence is intended to be robust against untrusted traffic.

Tip

This extension extends and can be used with the following extension category:

envoy.stats_sinks

{
  "address": "{...}",
  "prefix": "...",
  "max_bytes_per_datagram": "{...}"
}

address: (config.core.v3.Address, REQUIRED) The UDP address of a running DogStatsD compliant listener. If specified, statistics will be flushed to this address.

prefix: (string) Optional custom metric name prefix. See StatsdSink’s prefix field for more details.

max_bytes_per_datagram

(UInt64Value) Optional max datagram size to use when sending UDP messages. By default Envoy will emit one metric per datagram. By specifying a max-size larger than a single metric, Envoy will emit multiple, new-line separated metrics. The max datagram size should not exceed your network’s MTU.

Note that this value may not be respected if smaller than a single metric.

config.metrics.v3.HystrixSink¶

[config.metrics.v3.HystrixSink proto]

Stats configuration proto schema for built-in envoy.stat_sinks.hystrix sink. The sink emits stats in text/event-stream formatted stream for use by Hystrix dashboard.

Note that only a single HystrixSink should be configured.

Streaming is started through an admin endpoint GET /hystrix_event_stream.

This extension may be referenced by the qualified name envoy.stat_sinks.hystrix

Note

This extension does not operate on the data plane and hence is intended to be robust against untrusted traffic.

Tip

This extension extends and can be used with the following extension category:

envoy.stats_sinks

{
  "num_buckets": "..."
}

num_buckets

(int64) The number of buckets the rolling statistical window is divided into.

Each time the sink is flushed, all relevant Envoy statistics are sampled and added to the rolling window (removing the oldest samples in the window in the process). The sink then outputs the aggregate statistics across the current rolling window to the event stream(s).

rolling_window(ms) = stats_flush_interval(ms) * num_of_buckets

More detailed explanation can be found in Hystrix wiki.